A new Fedora Atomic Host update is available via an OSTree commit:

Version: 27.16
Commit(x86_64): 86727cdbc928b7f7dd0e32f62d3b973a8395d61e0ff751cfea7cc0bc5222142f
Commit(aarch64): 49f9b422bc53b30aea3074c75a15e8322ed1d14980ff0b5f9c694089598b4f2f
Commit(ppc64le): 600955d77630fec6d1d3a76af31d872f2fed8af1495399256a0dfff013a518f3

This is a large update as it is the first update in Fedora 27. Included are new kernel, systemd, ostree, rpm-ostree, and atomic CLI. Future updates should be quite a bit smaller than this.

We are releasing images from multiple architectures but please note that x86_64 architecture is the only one that undergoes automated testing at this time.

The diff between this and the previous released version is:

  • ostree diff commit old: d428d3ad8ecf44e53d138042bad56a10308883a0c5d64b9c51eff27fdc9da82c
  • ostree diff commit new: 86727cdbc928b7f7dd0e32f62d3b973a8395d61e0ff751cfea7cc0bc5222142f

Upgraded:

  • NetworkManager 1:1.8.4-2.fc27.x86_64 -> 1:1.8.4-7.fc27.x86_64
  • NetworkManager-libnm 1:1.8.4-2.fc27.x86_64 -> 1:1.8.4-7.fc27.x86_64
  • NetworkManager-team 1:1.8.4-2.fc27.x86_64 -> 1:1.8.4-7.fc27.x86_64
  • atomic 1.19.1-1.fc27.x86_64 -> 1.20.1-3.fc27.x86_64
  • atomic-registries 1.19.1-1.fc27.x86_64 -> 1.20.1-3.fc27.x86_64
  • audit 2.7.8-1.fc27.x86_64 -> 2.8.1-1.fc27.x86_64
  • audit-libs 2.7.8-1.fc27.x86_64 -> 2.8.1-1.fc27.x86_64
  • audit-libs-python 2.7.8-1.fc27.x86_64 -> 2.8.1-1.fc27.x86_64
  • audit-libs-python3 2.7.8-1.fc27.x86_64 -> 2.8.1-1.fc27.x86_64
  • bind99-libs 9.9.11-2.fc27.x86_64 -> 9.9.11-3.fc27.x86_64
  • bind99-license 9.9.11-2.fc27.noarch -> 9.9.11-3.fc27.noarch
  • bubblewrap 0.1.8-3.fc27.x86_64 -> 0.2.0-2.fc27.x86_64
  • cockpit-bridge 151-2.fc27.x86_64 -> 155-1.fc27.x86_64
  • cockpit-docker 151-2.fc27.x86_64 -> 155-1.fc27.x86_64
  • cockpit-networkmanager 151-2.fc27.noarch -> 155-1.fc27.noarch
  • cockpit-ostree 151-2.fc27.x86_64 -> 155-1.fc27.x86_64
  • cockpit-system 151-2.fc27.noarch -> 155-1.fc27.noarch
  • compat-openssl10 1:1.0.2j-9.fc27.x86_64 -> 1:1.0.2m-1.fc27.x86_64
  • container-selinux 2:2.28-1.fc27.noarch -> 2:2.29-1.fc27.noarch
  • container-storage-setup 0.8.0-1.git1d27ecf.fc27.noarch -> 0.8.0-2.git1d27ecf.fc27.noarch
  • coreutils 8.27-16.fc27.x86_64 -> 8.27-17.fc27.x86_64
  • coreutils-common 8.27-16.fc27.x86_64 -> 8.27-17.fc27.x86_64
  • criu 3.5-1.fc27.x86_64 -> 3.6-1.fc27.x86_64
  • crypto-policies 20170816-1.git2618a6c.fc27.noarch -> 20170816-2.gite0a4066.fc27.noarch
  • curl 7.55.1-5.fc27.x86_64 -> 7.55.1-7.fc27.x86_64
  • dbus 1:1.11.20-1.fc27.x86_64 -> 1:1.12.0-1.fc27.x86_64
  • dbus-libs 1:1.11.20-1.fc27.x86_64 -> 1:1.12.0-1.fc27.x86_64
  • device-mapper 1.02.142-4.fc27.x86_64 -> 1.02.144-1.fc27.x86_64
  • device-mapper-event 1.02.142-4.fc27.x86_64 -> 1.02.144-1.fc27.x86_64
  • device-mapper-event-libs 1.02.142-4.fc27.x86_64 -> 1.02.144-1.fc27.x86_64
  • device-mapper-libs 1.02.142-4.fc27.x86_64 -> 1.02.144-1.fc27.x86_64
  • device-mapper-persistent-data 0.7.0-0.6.rc6.fc27.x86_64 -> 0.7.5-1.fc27.x86_64
  • docker 2:1.13.1-26.gitb5e3294.fc27.x86_64 -> 2:1.13.1-42.git4402c09.fc27.x86_64
  • docker-common 2:1.13.1-26.gitb5e3294.fc27.x86_64 -> 2:1.13.1-42.git4402c09.fc27.x86_64
  • docker-rhel-push-plugin 2:1.13.1-26.gitb5e3294.fc27.x86_64 -> 2:1.13.1-42.git4402c09.fc27.x86_64
  • efivar 31-3.fc27.x86_64 -> 32-2.fc27.x86_64
  • efivar-libs 31-3.fc27.x86_64 -> 32-2.fc27.x86_64
  • expat 2.2.4-1.fc27.x86_64 -> 2.2.5-1.fc27.x86_64
  • gawk 4.1.4-7.fc27.x86_64 -> 4.1.4-8.fc27.x86_64
  • glib-networking 2.54.0-1.fc27.x86_64 -> 2.54.1-1.fc27.x86_64
  • glib2 2.54.1-1.fc27.x86_64 -> 2.54.2-1.fc27.x86_64
  • glibc 2.26-15.fc27.x86_64 -> 2.26-16.fc27.x86_64
  • glibc-all-langpacks 2.26-15.fc27.x86_64 -> 2.26-16.fc27.x86_64
  • glibc-common 2.26-15.fc27.x86_64 -> 2.26-16.fc27.x86_64
  • glusterfs 3.12.1-2.fc27.x86_64 -> 3.12.3-1.fc27.x86_64
  • glusterfs-client-xlators 3.12.1-2.fc27.x86_64 -> 3.12.3-1.fc27.x86_64
  • glusterfs-fuse 3.12.1-2.fc27.x86_64 -> 3.12.3-1.fc27.x86_64
  • glusterfs-libs 3.12.1-2.fc27.x86_64 -> 3.12.3-1.fc27.x86_64
  • gnupg2 2.2.0-1.fc27.x86_64 -> 2.2.3-1.fc27.x86_64
  • gnupg2-smime 2.2.0-1.fc27.x86_64 -> 2.2.3-1.fc27.x86_64
  • gnutls 3.5.15-1.fc27.x86_64 -> 3.5.16-3.fc27.x86_64
  • gperftools-libs 2.6.1-3.fc27.x86_64 -> 2.6.1-5.fc27.x86_64
  • grub2-common 1:2.02-18.fc27.noarch -> 1:2.02-19.fc27.noarch
  • grub2-efi-x64 1:2.02-18.fc27.x86_64 -> 1:2.02-19.fc27.x86_64
  • grub2-pc 1:2.02-18.fc27.x86_64 -> 1:2.02-19.fc27.x86_64
  • grub2-pc-modules 1:2.02-18.fc27.noarch -> 1:2.02-19.fc27.noarch
  • grub2-tools 1:2.02-18.fc27.x86_64 -> 1:2.02-19.fc27.x86_64
  • grub2-tools-extra 1:2.02-18.fc27.x86_64 -> 1:2.02-19.fc27.x86_64
  • grub2-tools-minimal 1:2.02-18.fc27.x86_64 -> 1:2.02-19.fc27.x86_64
  • gssproxy 0.7.0-12.fc27.x86_64 -> 0.7.0-24.fc27.x86_64
  • ima-evm-utils 1.0-1.fc27.x86_64 -> 1.0-2.fc27.x86_64
  • initscripts 9.77-1.fc27.x86_64 -> 9.78-1.fc27.x86_64
  • iproute 4.12.0-3.fc27.x86_64 -> 4.13.0-1.fc27.x86_64
  • iproute-tc 4.12.0-3.fc27.x86_64 -> 4.13.0-1.fc27.x86_64
  • kernel 4.13.9-300.fc27.x86_64 -> 4.13.15-300.fc27.x86_64
  • kernel-core 4.13.9-300.fc27.x86_64 -> 4.13.15-300.fc27.x86_64
  • kernel-modules 4.13.9-300.fc27.x86_64 -> 4.13.15-300.fc27.x86_64
  • kpartx 0.7.1-6.git847cc43.fc27.x86_64 -> 0.7.1-8.git847cc43.fc27.x86_64
  • krb5-libs 1.15.2-2.fc27.x86_64 -> 1.15.2-4.fc27.x86_64
  • libbasicobjects 0.1.1-33.fc27.x86_64 -> 0.1.1-36.fc27.x86_64
  • libcollection 0.7.0-33.fc27.x86_64 -> 0.7.0-36.fc27.x86_64
  • libcrypt-nss 2.26-15.fc27.x86_64 -> 2.26-16.fc27.x86_64
  • libcurl 7.55.1-5.fc27.x86_64 -> 7.55.1-7.fc27.x86_64
  • libini_config 1.3.0-33.fc27.x86_64 -> 1.3.1-36.fc27.x86_64
  • libnfsidmap 0.27-3.fc27.x86_64 -> 1:2.2.1-1.rc1.fc27.x86_64
  • libnl3 3.3.0-3.fc27.x86_64 -> 3.4.0-1.fc27.x86_64
  • libnl3-cli 3.3.0-3.fc27.x86_64 -> 3.4.0-1.fc27.x86_64
  • libpath_utils 0.2.1-33.fc27.x86_64 -> 0.2.1-36.fc27.x86_64
  • libpkgconf 1.3.9-1.fc27.x86_64 -> 1.3.10-1.fc27.x86_64
  • libref_array 0.1.5-33.fc27.x86_64 -> 0.1.5-36.fc27.x86_64
  • libreport-filesystem 2.9.2-1.fc27.x86_64 -> 2.9.3-1.fc27.x86_64
  • libsolv 0.6.29-2.fc27.x86_64 -> 0.6.30-2.fc27.x86_64
  • libsss_idmap 1.15.3-5.fc27.x86_64 -> 1.16.0-2.fc27.x86_64
  • libsss_nss_idmap 1.15.3-5.fc27.x86_64 -> 1.16.0-2.fc27.x86_64
  • libsss_sudo 1.15.3-5.fc27.x86_64 -> 1.16.0-2.fc27.x86_64
  • libtirpc 1.0.2-3.fc27.x86_64 -> 1.0.2-4.fc27.x86_64
  • libunwind 1.2-3.fc27.x86_64 -> 1.2.1-3.fc27.x86_64
  • libzstd 1.3.1-1.fc27.x86_64 -> 1.3.2-1.fc27.x86_64
  • linux-firmware 20171009-78.gitbf04291.fc27.noarch -> 20171123-79.git90436ce.fc27.noarch
  • lua-libs 5.3.4-5.fc27.x86_64 -> 5.3.4-6.fc27.x86_64
  • lvm2 2.02.173-4.fc27.x86_64 -> 2.02.175-1.fc27.x86_64
  • lvm2-libs 2.02.173-4.fc27.x86_64 -> 2.02.175-1.fc27.x86_64
  • microcode_ctl 2:2.1-18.fc27.x86_64 -> 2:2.1-19.fc27.x86_64
  • net-tools 2.0-0.44.20160912git.fc27.x86_64 -> 2.0-0.45.20160912git.fc27.x86_64
  • nettle 3.3-5.fc27.x86_64 -> 3.4-1.fc27.x86_64
  • nfs-utils 1:2.1.1-6.rc5.fc27.x86_64 -> 1:2.2.1-1.rc1.fc27.x86_64
  • nss 3.33.0-1.0.fc27.x86_64 -> 3.34.0-1.0.fc27.x86_64
  • nss-pem 1.0.3-5.fc27.x86_64 -> 1.0.3-6.fc27.x86_64
  • nss-softokn 3.33.0-1.0.fc27.x86_64 -> 3.34.0-1.0.fc27.x86_64
  • nss-softokn-freebl 3.33.0-1.0.fc27.x86_64 -> 3.34.0-1.0.fc27.x86_64
  • nss-sysinit 3.33.0-1.0.fc27.x86_64 -> 3.34.0-1.0.fc27.x86_64
  • nss-tools 3.33.0-1.0.fc27.x86_64 -> 3.34.0-1.0.fc27.x86_64
  • nss-util 3.33.0-1.0.fc27.x86_64 -> 3.34.0-1.0.fc27.x86_64
  • oci-umount 2:2.0.0-2.gitf90b64c.fc27.x86_64 -> 2:2.3.0-1.git51e7c50.fc27.x86_64
  • openssl 1:1.1.0f-9.fc27.x86_64 -> 1:1.1.0g-1.fc27.x86_64
  • openssl-libs 1:1.1.0f-9.fc27.x86_64 -> 1:1.1.0g-1.fc27.x86_64
  • ostree 2017.12-2.fc27.x86_64 -> 2017.13-3.fc27.x86_64
  • ostree-grub2 2017.12-2.fc27.x86_64 -> 2017.13-3.fc27.x86_64
  • ostree-libs 2017.12-2.fc27.x86_64 -> 2017.13-3.fc27.x86_64
  • p11-kit 0.23.8-1.fc27.x86_64 -> 0.23.9-2.fc27.x86_64
  • p11-kit-trust 0.23.8-1.fc27.x86_64 -> 0.23.9-2.fc27.x86_64
  • pcre 8.41-1.fc27.2.x86_64 -> 8.41-3.fc27.x86_64
  • pcre2 10.30-1.fc27.x86_64 -> 10.30-2.fc27.x86_64
  • pkgconf 1.3.9-1.fc27.x86_64 -> 1.3.10-1.fc27.x86_64
  • pkgconf-m4 1.3.9-1.fc27.noarch -> 1.3.10-1.fc27.noarch
  • pkgconf-pkg-config 1.3.9-1.fc27.x86_64 -> 1.3.10-1.fc27.x86_64
  • publicsuffix-list-dafsa 20170828-1.fc27.noarch -> 20171028-1.fc27.noarch
  • python2 2.7.13-17.fc27.x86_64 -> 2.7.14-2.fc27.x86_64
  • python2-asn1crypto 0.22.0-4.fc27.noarch -> 0.23.0-1.fc27.noarch
  • python2-cryptography 2.0.2-2.fc27.x86_64 -> 2.0.2-3.fc27.x86_64
  • python2-libs 2.7.13-17.fc27.x86_64 -> 2.7.14-2.fc27.x86_64
  • python3 3.6.2-13.fc27.x86_64 -> 3.6.3-2.fc27.x86_64
  • python3-asn1crypto 0.22.0-4.fc27.noarch -> 0.23.0-1.fc27.noarch
  • python3-cryptography 2.0.2-2.fc27.x86_64 -> 2.0.2-3.fc27.x86_64
  • python3-docker 2.5.1-2.fc27.noarch -> 2.6.1-1.fc27.noarch
  • python3-gobject-base 3.26.0-1.fc27.x86_64 -> 3.26.1-1.fc27.x86_64
  • python3-libs 3.6.2-13.fc27.x86_64 -> 3.6.3-2.fc27.x86_64
  • python3-sssdconfig 1.15.3-5.fc27.noarch -> 1.16.0-2.fc27.noarch
  • rpm-ostree 2017.9-1.fc27.x86_64 -> 2017.10-2.fc27.x86_64
  • rpm-ostree-libs 2017.9-1.fc27.x86_64 -> 2017.10-2.fc27.x86_64
  • runc 1:1.0.1-3.gitc5ec254.fc27.x86_64 -> 2:1.0.0-11.rc4.gitaea4f21.fc27.x86_64
  • screen 4.6.1-3.fc27.x86_64 -> 4.6.2-1.fc27.x86_64
  • selinux-policy 3.13.1-283.14.fc27.noarch -> 3.13.1-283.17.fc27.noarch
  • selinux-policy-targeted 3.13.1-283.14.fc27.noarch -> 3.13.1-283.17.fc27.noarch
  • skopeo 0.1.23-6.git1bbd87f.fc27.x86_64 -> 0.1.26-1.git2e8377a.fc27.x86_64
  • skopeo-containers 0.1.23-6.git1bbd87f.fc27.x86_64 -> 0.1.26-1.git2e8377a.fc27.x86_64
  • sos 3.4-2.fc27.noarch -> 3.5-1.fc27.noarch
  • sssd-client 1.15.3-5.fc27.x86_64 -> 1.16.0-2.fc27.x86_64
  • strace 4.19-1.fc27.x86_64 -> 4.20-1.fc27.x86_64
  • systemd 234-8.fc27.x86_64 -> 234-9.fc27.x86_64
  • systemd-container 234-8.fc27.x86_64 -> 234-9.fc27.x86_64
  • systemd-libs 234-8.fc27.x86_64 -> 234-9.fc27.x86_64
  • systemd-pam 234-8.fc27.x86_64 -> 234-9.fc27.x86_64
  • systemd-udev 234-8.fc27.x86_64 -> 234-9.fc27.x86_64
  • tzdata 2017b-2.fc27.noarch -> 2017c-1.fc27.noarch
  • vim-minimal 2:8.0.1176-1.fc27.x86_64 -> 2:8.0.1322-1.fc27.x86_64

Removed:

  • python-backports-1.0-11.fc27.x86_64

Added:

  • python2-backports-1.0-12.fc27.x86_64
  • python3-pytoml-0.1.14-2.git7dea353.fc27.noarch

Existing systems can be upgraded in place via e.g. atomic host upgrade or atomic host deploy. Systems on Fedora Atomic 26 can be upgraded using rpm-ostree rebase. Refer to the upgrade guide for more details.

Corresponding image media for new installations can be downloaded from GetFedora.org.

Respective signed CHECKSUM files can be found here:

For direct download, the latest targets are always available at the following URLs:

Filename fetching URLs for downloading to remote systems are available by querying the following links:

For more information about the latest targets, please reference the Fedora Atomic Wiki space.

The Vagrant Cloud page with the new atomic host:

To provision using vagrant:

vagrant init fedora/27-atomic-host; vagrant up

or, if you already have the box, to get the new one:

vagrant box update --box fedora/27-atomic-host